CBRN Reconnaissance Vehicle (CBRN-I)

The likelihood of large-scale use of weapons of mass destruction has been reduced over the past 15-20 years and the threat picture has in many respects changed character and become more diffuse.

Today, CBRN warfare weapons are more likely to be used in minor conflicts and by terrorists and criminals. Furthermore, international assignments have highlighted the risks posed by excluded industries and infrastructures in the form of toxic emissions and environmental damage. All in all, this has led to a changed view of the threat picture in Sweden as well as in our world at the same time as Sweden's ambitions to participate in international efforts have increased.

The Swedish Armed Forces (FM) had been commissioned by the Swedish Government to increase the capability for protection against interference with CBRN weapons to reduce its effects in the event of an armed attack. This also applied to associations that were part of different types of international missions and in support of civil society at ROTA events (Releases Other Than Attack) e.g. kemolyckor.

The indication (reconnaissance) vehicle was intended to be used as a qualified and protected indication/reconnaissance resource included primarily in NBC Company 04.

The preliminary PG (Partnership Goals) that Sweden were going to fulfil in international operations required, inter alia, that Swedish unions should be able to handle CBRN threats / events and be able to operate under these conditions.

Bring2Mind Consulting AB

Mobile CBRNe Detection-, Identification-, Monitoring-, Surveillance-, Warning-, Reporting-, Sample Retrieval and Protection capability

The probability of a large-scale use of weapons of mass destruction has been assessed as declining in the world but at the same time the risk increases for the use of CBRNe weapons on a lesser scale. For Sweden, it is primarily terrorism and environmental disasters that can constitute an CBRNe threat. To meet this new threat, the Swedish government has designated protection against CBRNe warfare agents as one area of technology within which Sweden should gain strategic competence. Establishment of CBRNe Company 04 is a step towards increasing operative capability within the area.

One of the tasks the Swedish Armed Forces (FM) have set for the CBRNe Company is to be able to secure roads while underway. To accomplish this task the Swedish Armed Forces (FM) gave the Swedish Defence Material Administration (FMV) the mission to develop an CBRNe Reconnaissance Vehicle.

During 2003, the Swedish Defence Material Administration (FMV) delivered two demonstrators and during 2006 two CBRNe Reconnaissance Vehicles with increased functionality will be delivered. The CBRNe Reconnaissance Vehicle uses the Patria XA-203S as the vehicular platform and is equipped with CBRNe reconnaissance systems.

The probability of a large-scale use of weapons of mass destruction had been assessed as declining in the world but at the same time the risk increased for the use of CBRNe weapons on a lesser scale, especially post the terror attack in New York, USA on the 11th of September, 2001.

For Sweden, it is primarily terrorism and environmental disasters that can constitute an CBRNe threat. To meet this new threat, the Swedish Government had designated protection against CBRNe warfare agents as one area of technology within which Sweden should gain strategic competence. Establishment of CBRNe Company 04 was a step towards increasing operative capability within the area.

One of the tasks the Swedish Armed Forces (FM) had set for the CBRNe Company was to be able to secure roads while underway. To accomplish this task the Swedish Armed Forces (FM) gave the Swedish Defence Material Administration (FMV) the mission to develop a CBRNe Reconnaissance Vehicle. During 2003, the Swedish Defence Material Administration (FMV) delivered two demonstrators and during 2006 two CBRNe Reconnaissance Vehicles with increased functionality, i.e. increased detection and sampling systems for Biological warfare agents. The CBRNe Reconnaissance Vehicle used the Patria XA-203S as the vehicular platform and was equipped with several CBRNe reconnaissance systems.

We delivered Systems LifeCycle Management (SLCM) Services support to the Swedish Defence Material Administration (FMV) and the Swedish Armed Forces (FM) in a multitude of areas (Management-, legal-, commercial-, technical- and administration services). A lot of effort was brought into requirement assessment and defining capability requirements. The main capability description document TTEM (“Teknisk och Taktisk Ekonomisk Målsättning”. Eng. Technical and Tactical Economic Objectives) was developed in close cooperation with the Swedish Armed Forces (FM). The TTEM we then used to define the requirement documents as vital annexes to the procurement documentation.

Our personnel developed a full set of procurement documentation (Specifications of the full system, technical requirements, system safety requirements and statement of work requirements including plans for project management, verification and validation, ILS and maintenance, system safety, documentation and training). We also provided full WBS documentation, governing documents, presentations, system design review reports, technical verification reports, minutes of meetings, import/export documents and project calculations including a commercial agreement proposal, according to the Swedish Defence Material Administration (FMV) procurement guideline document “FMV HandBok KravDok”, and delivered Systems LifeCycle Management (SLCM) Services during the full project LifeCycle.

Customer-/Industry Segment
Aerospace-, Defence- and Security Industry

Client
Swedish Defence Material Administration (FMV)

Project Name
CBRNe Reconnaissance Vehicle (CBRN-I) included the CBRNe Management- and Monitoring System (CBRN-I-MMS)

Duration
2002 — 2007

Security Rating Required
CLASSIFIED/SECRET

Security
Security Agreement Approved and Signed for Level 2
Our Personell Approved for Security Clearance Level H/S

Services
Systems LifeCycle Management (SLCM) Services

Delivery Content/Artefacts
We delivered a full set of procurement documentation (Specifications of the full system, technical requirements, system safety requirements and statement of work requirements including plans for project management, verification and validation, ILS and maintenance, system safety, documentation and training). We also provided full WBS documentation, governing documents, presentations, system design review reports, technical verification reports, minutes of meetings, import/export documents and project calculations including a commercial agreement proposal, according to the Swedish Defence Material Administration (FMV) procurement guideline document “FMV HandBok KravDok”, and delivered Systems LifeCycle Management (SLCM) Services during the full project LifeCycle.

The vehicle will have, without compromising the collective protection, the following capabilities:

– Point detection of CBRNe warfare agents, toxic industrial chemicals and radioactive materials
– Standoff detection of chemical warfare agents and toxic industrial chemicals
– Aerosol particle sampling
– Measurement of local meteorological parameters
– Reporting of vehicle position, meteorological and measurement data
– Marking of contaminated areas
– Decision support
– Warning
– Retrieve Samples

A computer based monitoring system is responsible for presenta­tion, analysis and reporting of data from the various sensors. The system provides the crew with the capability to conduct realistic training against simulated threats.

We delivered Systems LifeCycle Management (SLCM) Services support to the Swedish Defence Material Administration (FMV) and the Swedish Armed Forces (FM) in a multitude of areas (Management-, legal-, commercial-, technical- and administration services). A lot of effort was brought into requirement assessment and defining capability requirements. The main capability description document TTEM (“Teknisk och Taktisk Ekonomisk Målsättning”. Eng. Technical and Tactical Economic Objectives) was developed in close cooperation with the Swedish Armed Forces (FM). The TTEM we then used to define the requirement documents as vital annexes to the procurement documentation.

Our personnel developed a full set of procurement documentation (Specifications of the full system, technical requirements, system safety requirements and statement of work requirements including plans for project management, verification and validation, ILS and maintenance, system safety, documentation and training). We also provided full WBS documentation, governing documents, presentations, system design review reports, technical verification reports, minutes of meetings, import/export documents and project calculations including a commercial agreement proposal, according to the Swedish Defence Material Administration (FMV) procurement guideline document “FMV HandBok KravDok”, and delivered Systems LifeCycle Management (SLCM) Services during the full project LifeCycle.

The CBRNe Reconnaissance Vehicle is developed by the Swedish Defence Material Administration (FMV) supported by the Swedish National CBRNe Defence Center of the Swedish Armed Forces (FM SkyddC) and the Swedish Defence Research Agency (FOI). BAE Systems Bofors AB was the prime contractor for the vehicle integration of the CBRNe equipment, provided as GFE from the Swedish Defence Material Administration (FMV).

Project meetings were held at BAE Systems Bofors AB in Karlskoga, Sweden. Design- and Technical Review meetings alike.

Bring2Mind Consulting AB

About Us


Our total offering fits any project within any industry, not only clients within the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry, where we do most of our work today.

We work within the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry, where our personnel since 1985, have been supporting the public administration sector (Government Authorities) and the private business sector, delivering Systems LifeCycle Management (SLCM) Services, primarily around and within defence system procurement projects, providing services during procurement and provisioning of technically advanced and complex systems and solutions to the Swedish Defence Material Administration (FMV) and the Swedish Armed Forces (FM).

Within the Information- and Communications Technology Industry, we are in the startup phase of delivering secure, immediate and effective interaction between organizations, companies and their customers, partners and employees. The CMS & publishing tools we apply, is by far the most popular software with over 60% worldwide market share. This means the software is used by almost 35% of all the public websites online, the rest is used for intranet solutions not publicly available. The system is also used by many popular global brands across the world.

Bring2Mind Consulting AB

We Serve All

Reusing assets and leverage processes, methods, tools, documents and templates we already developed for the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry, leads to sustainable high service quality to meet or exceed client expectations whilst remaining economically competitive.

Our total offering fits any Industry, not only within the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry, where we do most of our work today.

We support the private business sector and the public administration sector (Government Authorities) by providing qualified consulting primarily around, and within, Systems LifeCycle Management (SLCM) Services. We cover common commercial-, legal- and operational- as well as technical- and administrative- disciplines, within programme-, project-, quality- and configuration management including production of digital and hardcopy material, which entails our customers and end-users to safely manage their technically advanced and complex systems.

Bring2Mind Consulting AB

We work with People and Digital Technologies for a Safer World and a Smarter Society

As our agency face a relentless pace of change and unprecedented level of competitiveness, agility is key to survival. Organizations are looking to Lean portfolio management to align the digital product investment portfolio to business strategy, and to quickly adapt the portfolio when strategy changes. To be successful, we provide transparency, analytics and feedback to various stakeholders at different levels of our processing workflow for optimal decision making. We also have a clear line-of-sight from strategic direction, through investment decision, to the choice of epics and services to be implemented, including the resulting impact on our clients’ business. We drive the continuous improvement process by looking at how our Systems LifeCycle Management (SLCM) services portfolio management enable Lean portfolio management for enterprise agility.

Bring2Mind Consulting AB, is an entrepreneur driven, supplier independent Knowledge & Consultancy Agency, supporting the private business sector and the public administration sector (Government Authorities) by providing knowledge consulting, management and advisory services, primarily within and around Systems LifeCycle Management (SLCM) Services, including supporting services, i.e. programme management, project management, risk assessment, management and control, quality assessment, management and control, configuration management and control, to the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry.

With a positive track record within the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry in providing Systems LifeCycle Management (SLCM) Services and seamless integration of products and systems against predefined requirements, Bring2Mind Consulting AB is unique in its understanding of technically advanced and complex systems, and how to apply innovative solutions in a pragmatic and cost effective fashion. Our services are developed and provisioned under the highest quality requirements based upon military standards, targeting the private business sector and the public administration sector (Government Authorities).

We ensure that our clients within the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry have the right equipment and functioning systems and services, at the right time to the right cost, to be able to carry out their mission. This is our contribution to the Swedish Defence Material Administration (FMV) and the Swedish Armed Forces (FM) — And we are proud of what we do!

Bring2Mind Consulting AB apply a classic business model, in a direct “One-to-One” relation to its clients and partners. This is where you will find us in the services supply chain. Sometimes we need to sign up specialist agencies for certain projects, to enable us to fulfil client requirements. But most important of all, we always apply our business model, whereas, if required by our clients, we can provide a larger network of system- and business partners.

It is important for Bring2Mind Consulting AB to conduct business in a responsible manner with long-term sustainability. We apply customer-oriented management systems for quality assurance and gather all our deliveries under qualified project management, quality management and configuration management. We provide Systems LifeCycle Management (SLCM) Services to the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry, as well as digital communication systems with high ICT content for close real-time communication between customers, partners and employees. In addition to statutory requirements and standards in relevant areas, we define our responsibility in relation to our key stakeholders. In order to ensure long-term value creation, we safeguard, among other things, good working relationships, high confidence from our customers, and responsibility for our environmental impact.

The staff within our Knowledge & Consultancy Agency have since 1985 operational working experience in the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry, at senior and middle management levels, nationally and internationally, within the whole supply chain of products, systems and services.

Almost twenty (20) years of experience within the Aerospace-, Defence- and Security Industry, working with some of Swedens largest, most technically advanced and complex defence system procurement projects for the Swedish Defence Material Administration (FMV) and the Swedish Armed Forces (FM), delivering Systems LifeCycle Management (SLCM) Services, has been very important for establishment of our Agency. We have supported these procurement projects by providing services over a very long time, and we are pleased to present to you, on our new website, some of our renowned and successful projects within the Aerospace-, Defence- and Security Industry.

We are multifaceted engineers, project managers, system analysts, consultants, advisors, architects, modelling and simulation specialists, and many more – and sometimes just catalysts for the successful achievement of your goals!

All this knowledge and working experience, built up almost during a lifetime, has made us capable to contribute to the development of Swedens total defence, by providing Systems LifeCycle Management (SLCM) Services, in a total offering from Bring2Mind Consulting AB.

With almost four decades (40 years) of operational working experience in the Aerospace-, Defence- and Security Industry and the Information- and Communications Technology Industry, at senior and middle management levels, nationally and internationally, within the whole supply chain of products, systems and services, Bring2Mind Consulting AB is well prepared to play the role as systems- and business- partner, capable of providing qualified and innovative Systems LifeCycle Management (SLCM) Services, supported by common commercial- and operational- as well as technical- and administrative- disciplines, within programme-, project-, quality- and configuration management, required to help our clients managing technically advanced and complex systems.

We cover all aspects of Systems LifeCycle Management (SLCM) Services, during all stages within products-, systems- and solutions provisioning; from initial studies, the needs/requirements assessment work, in the procurement phase, design and development, integration, over production, testing, verification & validation to final implementation, training, delivery and handover to the end-user and finally, the environmentally friendly decommissioning of products-, systems- and solutions for needs-oriented and situation-adapted solutions, with the right quality at the right cost. Our total offering is fully supported by qualified programme management, project management, quality assurance and configuration management.

Typical support services in our defence project assignments, have included close cooperation with Swedish national government authorities as well as international governmental authorities and the defence industry, nationally as well as internationally. Please find some sample service support areas worth mentioning below:

  • Programme management support and administration
  • Project management support and administration
  • Project governance and assessment
  • Requirements management and assessment
  • Risk management and assessment
  • System safety management and assessment
  • Security management and assessment
  • Quality management and assessment
  • Configuration management support and assessment
  • Technical advisor and systems engineering
  • Contractor logistics support (CLS) requirements management and assessment
  • Contractor logistics support (CLS) system definitions for defence material procurement projects, nationally and In-Theatre
  • Procurement requirements management and assessment
  • Procurement management support and administration
  • Procurement documentation design and development for advanced and complex technical systems (Requirement design and development for i.e. Operational Conditions and Constraints, Technical Specifications, System Safety, Security (NATO- and National Information Classification Systems), ILS, Quality, Configuration Management, Documentation and Training Support, Statement of Work, Instructions for Management Plans, DID Requirement Descriptions, Contractor Logistics Support (CLS), Contract Proposals and Supplier Evaluation Criteria etc.)
  • Procurement documentation production and packaging
  • Contract management support and administration
  • International Defence material User Group Secretary and administration support for multiple defence material systems
  • Design of international multilateral/bi-lateral collaboration arrangements and agreements for use within multinational project cooperations
  • International project coordinator for tracked vehicle material systems
  • .....

Our personnel have since 1985 provided Systems LifeCycle Management (SLCM) Services to the Information- and Communications Technology Industry and from 2003 onwards to the Aerospace-, Defence- and Security Industry, within the public administration sector (Government Authorities), and to the private business sector.

Through extensive support during all lifecycle stages within the projects we actively participated in, from requirement assessment, in the procurement phase, through the design and development phase, and during integration, testing, verification & validation, implementation, training, delivery, handover and environmentally friendly decommissioning of products and systems, we have delivered continous support to our clients and at the same time further developed our services offering. This concludes our business aims; to increase our customers’ ability and profitability in managing technologically advanced and complex systems.

For us, our agency and what we offer, in terms of Systems LifeCycle Management (SLCM) Services provisioning, is about ensuring new and existing customers’ needs for the right skills today and in the future.

Our work with Systems LifeCycle Management (SLCM) Services provisioning, in some of our reference projects worth mentioning:

Development-, Deployment- and Management of Information- and Communications Technology (ICT) Solutions and Services

  • Systems LifeCycle Management (SLCM) Services applied within ICT Procurement Projects
  • Development, implementation and maintenance of Web Communication platforms with Multisite and Multilingual capabilities
  • Implementation and maintenance of WordPress Multisite Information Network
  • Development, implementation and maintenance of Progress Sitefinity Digital Experience Portal
  • Administration of Microsoft SharePoint Information Portal
  • Development, implementation and maintenance of ASP.NET Asset Management System incl. RunTime Delivery Bundling and Optimization
  • Digital Photography and Video

Armoured-, Protected-, Tracked- and Wheeled Vehicle Systems incl. In-Theatre In-Service CLS Support

  • Assessment and proposal of LifeCycle Upgrade (LCU) / Mid Life Upgrade (MLU) for the Bv206/208 Tracked Vehicle System
  • Assessment and proposal of LifeCycle Upgrade (LCU) / Mid Life Upgrade (MLU) for the Bv309 Tracked Vehicle System
  • Procurement of Bv410 Tracked Vehicle System incl. versions and variants
  • Bv410 Fault Detection, Isolation & Recovery Reporting Analysis (BV410 FDI & RRA) incl. alignment of Fault Reporting Data and Systems
  • Procurement of TGSLK 1.5T Light Amphibian Cross-Country 1.5T Trailer
  • Procurement of BvS10 Tracked Vehicle System update incl. ISAF/SWECON Mission Adaption
  • Administration and Secretary of the BvS10 User Group
  • Administration and Secretary of the Swedish Armed Forces (FM) Tracked Vehicles User Group

Procurement- and Provisioning of Technical System Support (TSS) and Maintenance Services

  • Procurement of ISS-ATV-ISAF In-Service Support BvS10 for ISAF/SWECON (ISS)
  • Procurement of TSS 2019-2025 Technical System Support and Maintenance for the Swedish Armed Forces (FM) 2019-2025 (TSS)

CBRNe Detection-, Identification-, Monitoring-, Surveillance-, Warning-, Reporting- and Protection Systems

  • Procurement of CBRN-I: CBRNe Reconnaissance Vehicle
  • Procurement of CBRN-I-MMS: CBRNe Management- and Monitoring System
  • Procurement of CBRN-AL: Deployable CBRNe Analytical Laboratory
  • Design and procurement of CBRN-AWR: Automatic CBRNe Warning- and Reporting System

As a Knowledge & Consultancy Agency, our business is all about thorough understanding and knowledge of your industry, resulting in a comprehensive Systems LifeCycle Management (SLCM) Services offering, that is unique for our clients. We can help you create value in a number of different ways. To guide you through our broad range of services to the portfolio that’s right for, and aligned to your project, we may suggest multiple value creation pathways, to mention a few;

1. Competitive Services,
2. Programme- and Project Management Support,
3. Procurement Management Support,
4. Contract Management- and Administration Support,
5. In-Service Support,
6. Business Development for sustainable Growth,
7. Secure and Safe Society.

This concludes our business aims; to increase our clients’ ability and profitability in managing technically advanced products and complex systems in a safe manner.

For Bring2Mind Consulting AB, business oriented competence and knowledge provisioning is always about ensuring new and existing clients’ needs for the right skills today and in the future.